IBD mold

Description

Our inverted block drainage making mold are built with high quality material, by a high quality experienced team to give them their professional quality finish, they will require very little maintenance. in adition to very little training. all the molding equipments come with a instruction manual to help you on your way to producing quality bricks & blocks. when it come to cost We aim to bring your business affordable block making solutions. We supply high quality brick making equipments without the high price tag attached. Quality doesn't have to be expensive.

Precast concrete is a construction product produced by casting concrete in a reusable mold or "form" which is then cured in a controlled environment, transported to the construction site and lifted into place. Why choose precast concrete? We could go on for hours, but our favorite attributes are quality, versatility, sustainability, strength, durability and lower lifetime costs. The precast concrete industry offers an almost endless variety of products for above-ground and underground construction. From the largest infrastructure projects to the smallest architectural details, there’s a precast solution for all architects, engineers and construction professionals. kafum precast concrete molds are fabricated using good quality materials to ensure they give molders value for their money. this attribute has endeared many molders to us in considering we offer the best prices on precast concrete molds in Kenya. Some of the molds include Road Kerb, Waffles, Culverts, Fence Post, Road Channel, Paving Slab, Wall Copping, Ball Copping, Stay Block, Hatari Block, Side Slab, Inverted Block Drainage, Hollow Block, Soild Block, Ventilation,Balustrade, Louver Block,

radius 600 Pre-cast concrete units are now the most popular choice for kerbing. Hydraulically-pressed kerbs are strong, durable, cheap and can be manufactured to strict tolerances (BS EN 1340). There are some special shapes, notably quadrants and some droppers, which are still manufactured from vibrated concrete, although this material isn't as strong as a pressed concrete.
Standard kerbs have a pimpled finish and come in a fetching shade of concrete grey. More decorative (and therefore more expensive) kerbs are becoming popular on prestige and 'Heritage' schemes, with features such as exposed aggregates and textured finishes

edging32 There are 4 basic profiles to the most common, pcc road kerbs used throughout Britain.

Half-battered
Bull-nosed
Splayed
Square

Traditionally, most straight kerbs are 915mm in length (a hangover from the pre-metric days), although some of the kerb-units developed to match block-paving are only 100mm or 200mm long. Radius kerbs, ie those designed to form curves of less than 10m radius, are shorter than the equivalent straight units and the most modern ranges are being manufactured as 780mm in length.

watrmark All kerbs, other than those with a square profile, have what is known as a 'watermark' or a 'waterline'. This is a line on the face above which surfacing (and therefore surface water) is not normally expected to extend. In many cases, the surfacing level is kept 25mm or more below the watermark. The watermark is not a physical mark but generally coincides with a change in angle of the kerb face. watermark

kerbhbs1 The most commonly used pcc road kerbs are the half-battered profile. These provide an element of check sufficient to warn motorists that they are dangerously close to the edge of the carriageway, while the 'sloping back' profile enables road rollers to operate right up to the edge of the pavement without scratching or damaging the kerb face when the surfacing is laid. They are normally used where a footpath is provided adjacent to the carriageway

kerbsp01

Splayed profile kerbs are used in those situations where a vehicle may need to 'bump up' onto a verge in an emergency. For safety reasons, these are not used when a footpath is present.

kerbbns Where a crossing is required, normally for access to a private driveway, access point or pedestrian crossing, a bull-nosed or chamfered kerb is used. While the bull-nose kerb shown opposite is a British Standard kerb, the chamfered unit (in violet) is NOT and can only be obtained via certain manufacturers. The consent of the Local Authority Highways Department is required to use non-BS kerbs on public highways.

edging13 The pcc kerbs illustrated on this page are manufactured to prescribed sizes. The larger kerbs are approx. 125x255mm or 155x305mm, while the smaller units, are approx 125x155mm or 150x150mm. These smaller kerbs are typically used as 'crossing kerbs', on housing estate cul-de-sacs where no footpath is present, or in situations where a full-depth kerb would not be feasible, such as on a bridge deck. Transition kerbs, or 'droppers' as they are sometimes called, are used to link two differing kerb profiles. These are most commonly seen on 'dropped crossings', as illustrated

Lightweight pcc kerbs

erbs have always been heavy, cumbersome things and they take their toll on installers (as I can testify!), and so there has been a move within the industry, spurred on by health and safety concerns, to look at various options for reducing the wear and tear on kerb-layers.

k-lite Along with machine-aided installation, one of the options considered is a lighter kerb, and the K-Lite manufactured by Kafum is a prime example. The kerb length has been reduced to a much more manageable 450mm, but the form of the kerb has also been altered, creating a frog (a recess) in the rear of the kerb unit, which dramatically reduces weight to just 20kg per unit. The frog is eventually filled with haunch concrete and there is no loss of performance from the completed kerbline - just fewer knackered kerb-layers!

Special Kerbs

Other kerbs seen on the highways of the nations include....

kerbweir
Side Offlet Kerbs, sometimes known as Weir Kerbs, for use with behind-kerb drainage systems. They have largely been replaced by kerb-drain units nowadays, but they were quite popular 25+ years ago. They often have a cast iron or steel grille or facing to keep the worst of the street litter out of the sewers.

High Containment Kerb

trief 01 High Containment Kerb, such as the Trief or Titan kerbs. These are used to prevent traffic leaving the carriageway and are often used to protect vulnerable footpaths or sensitive roadside equipment, such as fuel pumps at filling stations, pedestrian islands, dangerous curves, etc. These are BIG kerbs, measuring around 450mm in height and weighing almost a quarter of a tonne

Channels

Channel kerbs were once a common sight at the edge of many roads, especially on carriageways where stone kerbs were used. They provided a 'gutter' for the drainage of surface water and provided a spacer between the edge of the macadam or asphalt and the face of the kerb. As pcc kerbs gradually replaced stone kerbs, pcc channels were often used in conjunction with them, but nowadays, they are rarely specified, unless they are used to create 'summits and valleys' adjacent to a relatively flat kerb line.

channel and kerb channel and kerb 02

Quadrants and Angles

quadangl As well as the straight and radius kerbs, the manufacturers also supply units with complementary profiles specifically to form right-angles.

The drawing opposite illustrates the Internal and External angle units, and the Quadrant Block, sometimes known as a 'cheese'. The Quadrant Block can be cut with a power saw (and a lot of patience) to create angles of less than 90°

quad 300 quad dbl

Disclaimer

kafum engineering services® Website and its contents (including, but not limited to text and photographs) are the exclusive property of kafum engineering services and are protected by copyright, trademark and other Kenyan laws. All materials Web site may be used only for personal informational purposes only.

Our Company

Contact Us

Koma Rock Rd, Nairobi, Light industry
Nairobi, Kenya

Mobile No

Call, SMS, Whatsapp

office: 0727131184

Email

info@kafumengineering.co.ke
sales@kafumengineering.co.ke